A compact powerhouse santoku with a lively, toothy carbon edge. The 47mm heel puts weight where it matters for push cuts and scooping food off the board.
THE NUMBERS
Profile: Santoku
Edge length: 157mm (6.2")
Heel height: 47mm
Steel: Aogami 2 core, 15N20 cladding (san mai)
Finish: Cross-peen tsuchime (hammer texture)
Handle: Black-pigment stabilized walnut with green-dyed burl inlay
One of one: this exact knife ships.
THE STEEL
Aogami 2 (Blue #2) is a classic Japanese carbon steel, alloyed with chromium and tungsten for better edge retention than plain carbon steel. It takes a fine, keen edge and comes back quickly on whetstones. Here the core is forge-welded between walls of 15N20, for a hard cutting edge inside tough cladding. The hammered face helps food release.
THE HANDLE
Every handle blank is foraged, milled, cured and stabilized in my Tallahassee shop, so it won't swell, crack or soak up water. This walnut is stabilized with black pigment and punctuated by a vivid green-dyed burl.
CARE
Carbon steel: it will darken and build a protective patina. Wipe it dry after acidic foods, hand wash only, and never leave it wet. Oil lightly before storing and sharpen on whetstones, never a pull-through sharpener or the dishwasher. Cut on wood or soft synthetic boards.
A compact powerhouse santoku with a lively, toothy carbon edge. The 47mm heel puts weight where it matters for push cuts and scooping food off the board.
THE NUMBERS
Profile: Santoku
Edge length: 157mm (6.2")
Heel height: 47mm
Steel: Aogami 2 core, 15N20 cladding (san mai)
Finish: Cross-peen tsuchime (hammer texture)
Handle: Black-pigment stabilized walnut with green-dyed burl inlay
One of one: this exact knife ships.
THE STEEL
Aogami 2 (Blue #2) is a classic Japanese carbon steel, alloyed with chromium and tungsten for better edge retention than plain carbon steel. It takes a fine, keen edge and comes back quickly on whetstones. Here the core is forge-welded between walls of 15N20, for a hard cutting edge inside tough cladding. The hammered face helps food release.
THE HANDLE
Every handle blank is foraged, milled, cured and stabilized in my Tallahassee shop, so it won't swell, crack or soak up water. This walnut is stabilized with black pigment and punctuated by a vivid green-dyed burl.
CARE
Carbon steel: it will darken and build a protective patina. Wipe it dry after acidic foods, hand wash only, and never leave it wet. Oil lightly before storing and sharpen on whetstones, never a pull-through sharpener or the dishwasher. Cut on wood or soft synthetic boards.