A one-of-a-kind workhorse gyuto for the demanding cook. The tall 57mm heel gives confident control through push cuts and heavy prep, and the hammered, forge-black face wears beautifully with use.
THE NUMBERS
Profile: Gyuto (chef's knife)
Edge length: 210mm (8.3")
Heel height: 57mm
Steel: Aogami 2 core, 15N20 cladding, nickel shim (san mai)
Finish: Vertical cross-peen tsuchime (hammer texture) with kurouchi
Handle: Stabilized spalted BlackJack oak with lightning-struck cherry cap
One of one: this exact knife ships.
THE STEEL
Aogami 2 (Blue #2) is a classic Japanese carbon steel, alloyed with chromium and tungsten for better edge retention than plain carbon steel. It takes a fine, keen edge and comes back quickly on whetstones. Here the core is forge-welded between walls of 15N20 with a nickel shim, for a hard cutting edge inside tough cladding.
THE HANDLE
Every handle blank is foraged, milled, cured and stabilized in my Tallahassee shop, so it won't swell, crack or soak up water. This spalted BlackJack oak is capped with a crosscut of cherry from a lightning-struck tree.
CARE
Carbon steel: it will darken and build a protective patina. Wipe it dry after acidic foods, hand wash only, and never leave it wet. Oil lightly before storing and sharpen on whetstones, never a pull-through sharpener or the dishwasher. Cut on wood or soft synthetic boards.
A one-of-a-kind workhorse gyuto for the demanding cook. The tall 57mm heel gives confident control through push cuts and heavy prep, and the hammered, forge-black face wears beautifully with use.
THE NUMBERS
Profile: Gyuto (chef's knife)
Edge length: 210mm (8.3")
Heel height: 57mm
Steel: Aogami 2 core, 15N20 cladding, nickel shim (san mai)
Finish: Vertical cross-peen tsuchime (hammer texture) with kurouchi
Handle: Stabilized spalted BlackJack oak with lightning-struck cherry cap
One of one: this exact knife ships.
THE STEEL
Aogami 2 (Blue #2) is a classic Japanese carbon steel, alloyed with chromium and tungsten for better edge retention than plain carbon steel. It takes a fine, keen edge and comes back quickly on whetstones. Here the core is forge-welded between walls of 15N20 with a nickel shim, for a hard cutting edge inside tough cladding.
THE HANDLE
Every handle blank is foraged, milled, cured and stabilized in my Tallahassee shop, so it won't swell, crack or soak up water. This spalted BlackJack oak is capped with a crosscut of cherry from a lightning-struck tree.
CARE
Carbon steel: it will darken and build a protective patina. Wipe it dry after acidic foods, hand wash only, and never leave it wet. Oil lightly before storing and sharpen on whetstones, never a pull-through sharpener or the dishwasher. Cut on wood or soft synthetic boards.